“What has happened to our washing machine? Why won’t it do laundry today? And how to deal with it?” Such questions may arise for any owner of Panasonic household appliances from time to time — nothing in this world lasts forever.
However, it is quite possible that, in your case, it will be possible to bring the machine back to life and extend its service life for a long time due to professional Panasonic appliance repair services. Shall we try?
The machine does not turn on
If a problem with the machine has appeared right at the start, and you simply cannot get involved in the process, then take a closer look at exactly what stage the appliance has stopped working.
Does the machine not connect to the network or start? If it does not respond to the on / off button, there may be a problem in the electrical circuit. The contacts could disperse or oxidize, the wiring could break, and so on.
If there is no reaction when starting the wash, there are several options:
- the door is not tightly closed, and the electronics do not give the command to start washing;
- the electronic module has broken, so it cannot issue commands;
- the problem is in the motor, and it might be necessary to replace it.
A precise diagnosis can only be made by a household appliance repair specialist from https://fixappliances.ca/mississauga-appliance-repair/.
2. Water is not supplied to the machine
The machine has turned on, some lights on the device panel have flashed, and that is all — the water is not supplied. The most trivial reason is the absence of water supply in your house or apartment because of repair works or emergencies.
This is one of the reasons, but in general, there are also several options:
- the water supply tap to the washing machine is closed;
- the inlet hose is twisted;
- the door is not tightly closed, and the electronic module does not send the command to supply water;
- the filter is clogged, and the smallest particles of dust and scale clog the water supply.
It is easy to clean the filter yourself: unscrew the drain hose, pick up the filter with pliers, rinse and return it to its place. If it is already so old and terrible that it cannot be washed in any way, it may be time to replace the filter with a new one. If these simple manipulations do not help, call a specialist, the matter is much more serious.
3. Water does not heat up
The fact that the water in the machine does not heat up can be detected at different stages of washing. Smart modern technology will not start washing until the water is heated to the desired temperature. Simpler machines will work through the program, but the laundry will remain cold and not be washed well.
There are usually two reasons:
- the heating element has broken;
- the electronic module that controls the temperature regime has broken.
We note right away that a breakdown of the heating element is the most common reason. What is better — to change the heater or try to descale it — only an experienced specialist will tell you. Independent replacement of the heating element can be carried out only if you already have experience in such repair work (moreover, the replacement instructions for different brands or models can be very different).
4. The drum does not rotate
With washing, nothing will work if the drum does not rotate in the machine. Why doesn’t it rotate? Again, here you need to look at what stage it stopped rotating.
If it doesn’t start at all, then the matter may be in the electrical circuit or the module that sends commands for washing. If the drum stops in the middle of a wash, it means that this wash has turned out to be too stressful for it. And usually, the drum stops in the middle of washing due to damage caused by overload.
Any of the components can fail:
- washing machine belt,
- drum support,
- drum spring,
- electronic module.
The most common case is a drum bearing failure. The prospect of further repairs largely depends on whether your tank can be disassembled or not. If it is not possible to disassemble it, you will have to change the entire drum assembly, which will result in 40-50 percent of the cost of a new machine. If it is possible, then everything is simpler. Just replace the worn part.
Even though Panasonic appliances are known to be reliable in the market, nothing can be eternal. So, keep calm and try to figure out the reason for failure. Or call a professional repair specialist to help you.Why Try Out Rocket.net - IcyCanada's recommended hosting provider